A historic estate often has several flues serving fireplaces that were added in different decades. Each flue has its own liner, its own draft path, and its own history of repairs. A single annual sweep note cannot show which flue was examined or what the camera actually saw. The record below turns that visit into a property document that a future steward can read without calling the original chimney company.
Key takeaways
- List every flue and fireplace before the first inspection visit.
- Record the weather, the access method, and the tools used.
- Keep the camera footage tied to a flue identifier and a time stamp.
- Separate a cleaning, a repair recommendation, and a completed repair.
- Set the next inspection from the liner condition, not the calendar alone.
Start with the flue inventory
Walk the house and list every fireplace, stove, and flue connection with a permanent identifier. Use a room name and a stack position so the label still makes sense after a renovation. Photograph the hearth, the damper, and the visible liner at the top of each opening. A flue that is forgotten during the inventory will be forgotten during the inspection as well.
Match each connection to the chimney stack that serves it and note any shared stack. A stack with two flues needs a clear record for each one, because a defect in one can affect the draft in the other. Record the termination height, the cap type, and the surrounding roof material. These details let the inspector plan access before arriving on site.
Note the appliance type and the fuel it burns for every connection. A wood fireplace, a gas insert, and a solid-fuel stove have different inspection needs and different safety limits. Record the manufacturer and the model when a plate is visible. The appliance record helps the inspector interpret what the camera shows inside the flue.
Add the service history that the household already holds, including past sweeps and repairs. Mark any entry that lacks a date, an invoice, or a technician name as unverified. The new inspection should confirm or correct those older claims rather than repeat them. A clean history is useful only when its source is visible.
Record the inspection conditions
Open the record with the date, the time, and the name of the person who performed the inspection. Add the weather and the indoor temperature, because a cold flue can change the draft and the camera view. Note whether the house was occupied and whether any appliance had been used that day. These conditions explain differences between two visits to the same flue.
Record the access method for the roof, the stack, and each interior opening. Note the ladder position, the anchor points, and any panel that had to be removed. Photograph the access route so the next visit does not rediscover it. An access note also shows whether the inspection reached the full run of the flue.
List the tools that were used, including the camera, the rods, the brushes, and the light. Record the camera model and the recording length for each flue. A screenshot without that context is hard to defend later. The tool record turns a collection of images into a repeatable inspection.
Describe the condition of the firebox and the immediate surround before any cleaning begins. Note soot patterns, staining, cracked brick, and any loose mortar at the opening. Photograph each item in place and again after the sweep. The before images protect both the owner and the vendor if a later dispute arises.
Document what the camera finds
Assign every camera run to one flue identifier and one time stamp. Capture the top, the middle, and the bottom of the run, plus any transition or offset. Add a short spoken note or a written caption for each segment. A labelled video is far more useful than an unlabelled folder of clips.
Describe the liner material, the joint condition, and any gap that the camera reveals. Note the location of a crack by distance from the top or by the nearest offset. Record whether the defect is visible, probable, or confirmed by a second view. The inspector should state the evidence behind each conclusion.
Record the amount and type of debris that was removed from each flue. Note whether the debris was soot, creosote, nest material, or fallen masonry. Weigh or estimate the volume and photograph the pile before disposal. A debris record shows how the flue is behaving between visits.
Flag any observation that needs a specialist, such as a damaged crown or a compromised liner. Write the flag in plain language and add the recommended next step. Do not let a safety note sit only in a verbal handover. The owner should be able to see the concern and the planned response in one place.
Log the sweep and the repairs
Record the sweep as a separate event from the inspection, even when one visit covers both. Note the brushes used, the areas reached, and the debris removed from each flue. Add the time the work started and finished. A sweep entry without those details cannot be compared with the next one.
When a repair is recommended, write the scope, the reason, and the urgency in the record. Distinguish a maintenance item from a defect that limits safe use. Record the owner's decision and the date it was given. A recommendation that was declined is still part of the property history.
Log the completed repair with the parts, the technician, and the evidence of the result. Photograph the repaired section and note the method used to confirm it. Record any change to the appliance or the venting that followed. The repair entry should close the loop that the inspection opened.
Keep the invoice and the warranty beside the inspection entry. Note the warranty period and the conditions that could void it. A future owner may need that information before authorizing new work. The record should answer the warranty question without a search through old email.
Close the record and set the next date
Summarize the condition of each flue in one short paragraph at the front of the record. State what was cleaned, what was repaired, and what remains open. Give the owner a clear view of the property rather than a list of tasks. The summary is the page most people will actually read.
Set the next inspection from the liner condition, the appliance use, and the manufacturer guidance. A heavily used fireplace may need a shorter interval than a decorative one. Record the basis for the interval so a later reader can judge it. A date without a reason is easy to postpone.
Send the owner a short note with the summary, the open items, and the next date. Attach the full record and keep the raw footage in the property archive. Ask the owner to confirm any decision that is still pending. A record is finished only when the household knows what it says.