Real Estate Luxury

Powered by StealthAgents

Property Management

Prepare a driveway gate access audit for a luxury estate

A driveway gate access audit that inventories every gate and controller, reconciles credentials with holders, and tests the intercom, sensors, and manual release at a luxury estate.

Victoria Harmon
Prepare a driveway gate access audit for a luxury estate
Table of contents

A gate that opens for the right car and the wrong person is a quiet security failure. The credential may be a code shared with a contractor, a remote left in a sold vehicle, or a fob that was never returned. An access audit finds those gaps before an incident does. It inventories the gates and controllers, reconciles every credential with a named holder, and tests the intercom, the sensors, and the manual release. The audit is a maintenance task, not a crisis response.

Key takeaways

  • Inventory every gate, controller, and credential before the audit.
  • Match each active credential to a named person and a review date.
  • Test the intercom, the safety sensors, and the manual release.
  • Reconcile visitor and vendor logs against issued access.
  • Set a credential review cycle and a revocation procedure.

Inventory the gates and the controllers

List every vehicle gate, pedestrian gate, and barrier arm on the property. Note the location, the width, the operator model, and the power source. Include the service entrance, the delivery gate, and the pool or beach access if they are controlled. A gate that is not in the inventory is a gate that is not audited. The list should match the property site plan.

Record the controller, the keypad, the receiver, and the intercom for each gate. Note the firmware version and the last service date. Add the backup power arrangement and the behaviour during an outage. A gate that fails closed can trap a guest, and one that fails open defeats the purpose. The audit should state which behaviour is intended.

Record the manual release method and where the key or tool is kept. Note who knows how to use it and where the instructions are posted. A release that cannot be found at night is not a release. Test it during the audit and record the result. The test should be done with the gate in a safe position.

Photograph each gate, controller, and release point. Note any damage, corrosion, or temporary repair. A coastal or rural gate may have salt or dust problems that a city gate does not. Record the condition and the follow-up. The photo set becomes the baseline for the next audit.

List every credential and its holder

Export the full credential list from the access system, including codes, fobs, cards, and app invitations. Note the issue date, the last use, and the current status. A credential with no recorded holder is an orphan and should be investigated first. Record the export date so the list can be reconciled later. The export is the backbone of the audit.

Match each credential to a named person, a role, and a property contact. Note whether the holder is staff, a vendor, a family member, or a guest. A shared code with no name cannot be revoked cleanly. Where a shared code exists, record the reason and the plan to replace it. The audit should reduce shared access, not document it forever.

Compare the credential list with the current staff roster and the active vendor contracts. Mark every credential that belongs to a person who has left or a contract that has ended. Note the date the access should have been removed. A departed vendor with an active fob is the most common finding. The reconciliation should be done against a dated roster, not memory.

Record the visitor and delivery process for each gate. Note whether visitors receive a temporary code, a call from the gate, or an escort. Add the rule for a package or a food delivery after hours. A process that depends on a guard recognising a face will fail on a guard's day off. The audit should show the process and the evidence it leaves.

Test the intercom, sensors, and release

Test the intercom from the gate to the house and to the guard post. Note the audio quality, the delay, and the fallback when the network is down. A gate intercom that depends on one internet link is a single point of failure. Record the mobile fallback and the number it calls. The test should include a real conversation, not only a dial tone.

Test the safety sensors with a vehicle and with a person-sized object. Note the stopping distance and the reversal behaviour. A sensor that ignores a child or a pet is a serious defect. Record the result and the repair date. The test should be repeated after any change to the gate or the driveway.

Test the manual release with the power on and with the power off. Note the force required and whether the gate can be moved by one person. A release that needs two people is not usable in an emergency. Record the tool, the location, and the person trained to use it. The audit should produce a short training note, not only a pass mark.

Test the anti-tailgating and the vehicle loop behaviour where the gate supports it. Note whether a second car can follow through before the gate closes. Record the timing and the setting. A gate that closes on a trailer can damage the gate and the vehicle. The audit should identify the setting and the owner who can change it.

Reconcile visitor and vendor records

Pull the visitor and vendor logs for a fixed period and compare them with the access events. Note the entries that have no matching credential or escort. A delivery that opened the gate without a logged credential needs an explanation. Record the pattern rather than a single anomaly. The reconciliation should be done on a sample large enough to show the process.

Check the after-hours entries and the weekend entries separately. A vendor who arrives at midnight may be legitimate, but the record should show who authorised it. Note the authorisation method and the name. A gate log without an authoriser is only a timestamp. The audit should connect the event to a decision.

Record the vendors who hold recurring access and the contract end date for each. Note the services that genuinely need after-hours access and the ones that do not. A landscaper with a night code is a finding unless the work requires it. The audit should recommend the narrowest access that still lets the work happen.

Review the guest arrival process for the period and note any gate left open or any code shared by message. A code sent to a guest can travel further than the booking. Record the advice given and the alternative, such as a single-use link or a call from the gate. The audit should improve the process, not just list the exceptions.

Set a credential review cycle

Set a review cycle that matches the property's turnover, such as quarterly for staff and at every contract renewal for vendors. Record the review date and the owner. A review that happens only when someone remembers will not happen. Add the review to the maintenance calendar. The cycle should be short enough to catch a departure before it becomes a risk.

Write a revocation procedure that names the person, the system, and the confirmation step. Record the time from the decision to the removal. A revocation that is requested but not confirmed is still an open credential. The procedure should include the gate, the alarm, and any app account. Test it once and keep the evidence.

Record the audit findings in a short register with the owner and the due date for each. Separate the immediate risks from the improvements. A missing manual release key is immediate, while a cosmetic keypad upgrade can wait. The register should show the status and the closure evidence. A finding without an owner is only a note.

Review the audit with the owner and the security lead each cycle. Ask what changed in the household, the staff, and the vendor list. A new tenant, a renovation, or a sale can change the access map overnight. Record the change and update the inventory. The audit then becomes a living control, not an annual document.

Keep exploring